Haufinyane ho Fihla Suda Plasma Cutting Engraver CUT 40

Haufinyane ho Fihla Suda Plasma Cutting Engraver CUT 40 Featured Image
  • Haufinyane ho Fihla Suda Plasma Cutting Engraver CUT 40
  • Haufinyane ho Fihla Suda Plasma Cutting Engraver CUT 40
  • Haufinyane ho Fihla Suda Plasma Cutting Engraver CUT 40
  • Haufinyane ho Fihla Suda Plasma Cutting Engraver CUT 40

Tlhaloso e Khutšoanyane:

Mohlala oa Sehlahisoa: CUT-40 Inverter Plasma Cutting Machine

Pomatla a motlakase (V):AC 1~230±15%

Boemo ba Hona Joale (A):15-40

 

 


Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Re boloka ho ntlafatsa le ho ntlafatsa thepa le litšebeletso tsa rona.Ka nako e ts'oanang, re sebetsa ka mafolofolo ho etsa lipatlisiso le kholo bakeng sa Newly Arrival Suda Plasma Cutting Engraver CUT 40, Re amohela bareki ba bacha le ba khale ho ikopanya le rona ka mohala kapa ho re romella lipotso ka poso bakeng sa likamano tsa khoebo tsa nako e tlang le ho fihlela katleho e tšoanang.
Re boloka ho ntlafatsa le ho ntlafatsa thepa le litšebeletso tsa rona.Ka nako e ts'oanang, re sebetsa ka mafolofolo ho etsa lipatlisiso le kholo bakeng saChina Suda le Plasme, Mehaho ea rona e nang le thepa e ntle le taolo e babatsehang ea boleng ho pholletsa le mekhahlelo eohle ea tlhahiso e re nolofalletsa ho tiisa khotsofalo e feletseng ea bareki.Haeba u thahasella leha e le efe ea lihlahisoa tsa rona kapa u ka rata ho buisana ka taelo e tloaelehileng, ka kōpo ikutloe u lokolohile ho ikopanya le 'na.Re labalabela ho theha likamano tse atlehileng tsa khoebo le bareki ba bacha lefatšeng ka bophara.

PLASMA KHOA

Mochini oa ho itšeha oa plasma ke mofuta o mocha oa lisebelisoa tsa ho itšeha ka mocheso, 'me molao-motheo oa ona o sebetsa o ipapisitse le moea o hatelitsoeng joalo ka khase e sebetsang, ho isa ho plasma arc e lebelo haholo joalo ka mohloli oa mocheso, ha tšepe e qhibilihang ka mokhoa o sa lekanyetsoang, moea o pharalletseng o ka foka. tšepe, ho etsa kefe e moqotetsane.

Sesebelisoa se ka sebelisoa bakeng sa tšepe e sa hloekang, aluminium, koporo, tšepe e entsoeng ka tšepe, tšepe ea carbon le lisebelisoa tse ling tsa tšepe, eseng feela lebelo la ho itšeha, kerf, sebopeho se senyenyane, sebaka se amehileng ke mocheso se senyenyane, empa le lisebelisoa tsa mosebetsi ha li bonolo ho li etsa. ho holofala.Ts'ebetso ea eona e bonolo, 'me e boetse e na le phello e kholo ea ho boloka matla .Sesebelisoa se sebetsa mecheng ea mefuta eohle,metal structures mannufacturing,installation and maintenance ,bakeng sa nmedium,thin sheet seha,ho cheka, open groove cutting , joalo-joalo.

 

 

Bokhoni ba ho itšeha bo eketseha ka makhetlo a 1.8 ka lebelo la ho itšeha ha bo bapisoa le sehang mollo.

Sebaka sa tšepe se teteaneng se ka khaoloa habonolo le kapele.

E loketse ho seha tšepe e sa hloekang, koporo, tšepe le tšepe ea aluminium joalo-joalo.

Ts'ebetso e bonolo, e boreleli ea ho itšeha.

Hf e amme Arc-staring cutting (30,40).

ITEM

KOTLO-30

KGOTSO-40

Motlakase oa Motlakase(V)

AC 1~230±15%

AC 1~230±15%

Kenyeletso e Lekanyelitsoeng(KVA)

3.8

5.3

No Load Voltage( V)

240

240

Boemo ba Hona Joale(A)

15-30

15-40

Rated Output Voltage (V)

92

96

Duty Cycle(%)

60

60

Sebetsa (%)

85

85

Tekanyo ea Insulation

F

F

Tshireletso Degree

IP21S

IP21S

Botenya ba ho Seha(σmm)

1~8

1-12

Tekanyo(mm)

530*205*320

530*205*320

Boima ba 'mele

NW: 7,5 GW: 11

NW: 7,5 GW: 11

Tšebeletso ea OEM

(1) Stencile Customer Company Logo ka mochine.
(2) Bukana ea Ts'ebetso ( Puo kapa litaba tse fapaneng)

Palo e nyane: 100 PCS

Letsatsi la ho Romela: Matsatsi a 30 kamora ho amohela depositi
Nako ea Tefo: 30% TT esale pele, 70% TT pele e romelloa kapa L/C Ha u bona.

LBH

1. Na u k'hamphani e hlahisang kapa ea ho rekisa?
Re etsa tlhahiso e fumanehang toropong ea Ningbo, re akaretsa sebaka sa lisekoere-mithara tse 25000, haufi le boema-kepe ba Ningbo, re na le lifeme tse 2, e 'ngoe e sebetsa haholo ho hlahisa mochini oa welding, joalo ka, MMA, MIG, WSE, CUT joalo-joalo.Helmete ea Welding le Chaja ea Battery ea Koloi, Khamphani e 'ngoe ke ea ho hlahisa thapo ea welding le plug.

2.Na mohlala o lefshoa kapa o lokolohile?

Mohlala oa ho cheselletsa helemete le likhoele ha li lefelloe, u lefella litšenyehelo tse hlakileng feela.U tla lefella mochini oa tjheseletsa le litšenyehelo tsa eona tsa ho tsamaisa thepa.
3. Nako e kae e ka amohela mochini oa welding oa mohlala?

Tlhahiso ea mohlala e nka matsatsi a 3-4, le matsatsi a 4-5 a ho sebetsa ka mokhoa o hlakileng.

 

Re boloka ho ntlafatsa le ho ntlafatsa thepa le litšebeletso tsa rona.Ka nako e ts'oanang, re sebetsa ka mafolofolo ho etsa lipatlisiso le kholo ea Newly Arrival Suda Plasma Cutting Engraver ( CUT 40), Re amohela bareki ba bacha le ba khale ho ikopanya le rona ka mohala kapa ho re romella lipotso ka poso bakeng sa likamano tsa nako e tlang tsa khoebo le ho finyella katleho e tšoanang. .
Ho Fihla BochaChina Suda le Plasme, Mehaho ea rona e nang le thepa e ntle le taolo e babatsehang ea boleng ho pholletsa le mekhahlelo eohle ea tlhahiso e re nolofalletsa ho tiisa khotsofalo e feletseng ea bareki.Haeba u thahasella leha e le efe ea lihlahisoa tsa rona kapa u ka rata ho buisana ka taelo e tloaelehileng, ka kōpo ikutloe u lokolohile ho ikopanya le 'na.Re labalabela ho theha likamano tse atlehileng tsa khoebo le bareki ba bacha lefatšeng ka bophara.

  • E fetileng:
  • E 'ngoe:

    • LIHLAHISO TSE HLAHANG